What Is Secondary Glazing?
Secondary glazing is a cost effective method to increase the thermal efficiency and reduce noise of existing single glazed windows. Unlike replacement primary window units it doesn't require removal of the frames that are in use and is more sympathetic to the period homes.
A good company will be able to offer support following installation, with a courtesy call after a week or so to inquire about how your installation is going on. They should also be FENSA accredited and provide a product warranty.
Improved thermal efficiency
The addition of secondary glazing to existing windows can reduce heat loss and eliminate drafts. It can also make your home more comfortable and peaceful. It is important to understand that this solution is not a replacement for triple or double glazing, and it will only offer a small increase in energy efficiency.
Glass isn't a good insulator however, an air layer or sometimes argon gas between two panes glass can help to slow the transfer of heat from warm to cold and help to reduce condensation. A layer of insulation between the two glass panes in a double glazed window will prevent cold air from penetrating your home, and will help keep warm air inside your property.
There are a myriad of different systems that can be installed with DIY kits while others require a professional installation. There are systems that fit sliding sash windows and other frames that are already in place. Some can be opened and closed and close, while others are attached to the wall.
The most affordable secondary glazing system is the 'lift-out' model. This is a system that is inserted into the window that is already in place and then lifted up from a channel. It is suitable for sash windows or where access to the primary window is limited like in the conservation or listed building area.
Some systems offer greater insulation than others, based on the type of glazing and the gap between the primary and secondary window. The greater the distance between two panes and the greater the thermal performance.
In certain cases, adding secondary glazing to a home can boost its efficiency to a point at which it can match the insulation provided by modern triple or double glazed windows. This is particularly true for older properties where planning restrictions restrict the type of replacement windows that can be put in place. In these situations it is possible to use secondary glazing to insulate the old sash windows may be the only cost-effective option.
Reduced noise
Windows let a significant amount of noise to enter a home. This is a particular problem for those who live near rail lines. In double glazed near me upgrading to double glazing will lessen the impact the outside noise can have on a property. However many people do not want to or is able to afford the change of all their windows. This is the point where secondary glazing comes into play. It involves the installation of an additional window to a property's existing frame. This second window provides an extra (sealed) barrier that helps to shield the home from cold temperatures as well as external noise.
Noise pollution is a serious problem that could cause long-term harm to your health if you do not address it. Fortunately, Ecoease offers a low-cost solution to reduce the amount of outside noise that could get into your home. Our secondary double glazing is a great alternative for those looking to reduce noise pollution, but without spending an enormous amount to replace their windows.
The primary benefit of secondary glazing is that it provides an additional barrier between your home and the outside world, greatly lessening the amount of noise pollution. This is accomplished by placing an additional frame and pane within the window with a gap of around 100mm. The secondary window is able to be opened and shut for ventilation, unlike the primary window.
This barrier can also help to insulate the room from cold air which could otherwise escape through the original window and then down the wall. This will keep the room warm and decrease energy costs.
The secondary glazing helps to minimize noise from outside activities and traffic. The additional barrier between your home and the outside world is an enormous comfort factor and can make a real difference to your daily life.
The system can be installed on any type of window such as awnings, sliding sash vertical windows, and sliding doors. It can be fitted to single windows or multiple windows across a house, and is a much cost-effective alternative to replacing all your windows. It also keeps the appearance of your property and can be a more appealing option for buildings with listed structures where changing windows could compromise their appearance.
Security is a top concern.
Double glazing is typically considered to be a costly option. However, this isn't always the case. Secondary glazing is actually cheaper than you think, particularly when you consider its effectiveness as a security measure. In addition to offering insulation, it also functions as a second barrier that is hard for burglars to get into. Instead of replacing your existing windows with double glazing which is a difficult procedure in many instances and might require planning permission, you can install secondary glazing instead.
Secondary glazing is designed to fit within your window frames that are already in place unlike windows that can be customized to fit any home. It's a simple solution that provides many benefits, such as reduced costs for energy and improved comfort. In addition it can increase your home's security overall by reducing the amount of noise that enters your home.
If you are looking for secondary glazing in your area You should take into consideration the quality of products and the service offered by the installers. Find out their insurance certificates, certifications and warranties. You should also look at how long the business has been operating for. Experienced companies will ensure that work is completed correctly and efficiently.
The main benefit of secondary glazing is that it decreases heat loss and improves draught-proofing by constructing a second window behind the existing window. This second pane is an insulating layer which reduces heat loss, and also reduces the intrusion of noise. It's also a cost-effective method to upgrade your windows without needing to replace them completely.
If you reside in an older home with single-glazed windows, then you're probably spending a lot of money on heating and cooling. This is because glass is an excellent conductor of heat, meaning that hot water as well as electricity are leaking through your windows as you're trying to stay warm during the winter.
Investing in secondary glazing is the most effective way to solve this problem. This kind of window treatment is less expensive than constructing a new window unit and will provide you with many advantages, including improved insulation, less energy bills, and enhanced security. You can also choose from a wide range of different styles, including hinged units as well as lift-out secondary glazing.
Improved appearance
Many homeowners are concerned about the impact of replacing their current windows on the appearance of their house. It is possible to get the energy efficiency of modern double glazing without affecting the appearance by installing secondary glass instead. The installation process is much less complicated process than replacing original windows and can be completed much faster, too.
The process involves an entirely separate frame and pane, which are placed on the inside of the window, usually leaving a gap of around 100mm between them. The rubber seals help to separate the room from the window, reducing the transmission of sound. It is also a great option to increase the insulation of period buildings where planning restrictions prohibit the use of modern double-glazed units, such as in listed or conservation areas.
There are many different styles of secondary glazing that are available to meet the needs of every customer and requirements, from systems that can be opened as windows (hinged secondary glazing) to those that fit within the existing sash frame and is fixed in the frame. Some are designed to be as subtle as possible, with frames that are hidden from view and unobtrusive internally. They are particularly useful in situations where regular ventilation is required. opening the sash may cause danger to health and safety if a large amount of wind blows into the building.
Some companies can offer permanent secondary glazing made of aluminium that is installed on the exterior of your current window, offering better energy performance and a more contemporary look. This is a good solution for buildings that are listed or historic. It is also economical if you are on a tight budget. It is possible to select a colour and woodgrain finish that matches your home, so it will appear as though it has always been part of the property.
Whatever type of secondary glazing you decide to choose, it is important to find a company that has experience of working in your type of property and a good reputation for customer service. You can also check online reviews and ask for suggestions from your friends and family. You should also verify whether the business is a member of professional organizations, such as the Glass and Glazing Federation.